Ten carbon-weave door-control covers arranged above a white Model Y Juniper, including four panel surrounds and six smaller covers.
Carbon-weave surround around a single window switch and adjacent triangular door-release button on a black door panel.
Close-up of a carbon-weave door-release cover with a white door symbol beside a stitched black grab handle.
Black door panel with carbon-weave trim around four window switches and covers at the door-release controls.
Carbon-weave driver-door switch surround viewed across the grab handle, showing four window switches and release-button covers.
Close-up of four black window switches inside a carbon-weave surround with a triangular door-release cover at one end.
Carbon-weave door-release cover fitted beside the stitched edge of a black door grab handle.
Single-window-switch door panel with carbon-weave covers around the switch and two door-release control areas.
Angled view of a carbon-weave surround and triangular release-button cover around four black window switches.
Door-panel overview showing carbon-weave covers on the four-switch surround and the upper door-release area.
Ten dark carbon-weave covers laid out on white, showing four panel surrounds and six smaller door-control covers.
Ten reflective carbon-weave covers laid out on white, showing four panel surrounds and six smaller door-control covers.
Ten carbon-weave door-control covers arranged above a white Model Y Juniper, including four panel surrounds and six smaller covers.
Carbon-weave surround around a single window switch and adjacent triangular door-release button on a black door panel.
Close-up of a carbon-weave door-release cover with a white door symbol beside a stitched black grab handle.
Black door panel with carbon-weave trim around four window switches and covers at the door-release controls.
Carbon-weave driver-door switch surround viewed across the grab handle, showing four window switches and release-button covers.
Close-up of four black window switches inside a carbon-weave surround with a triangular door-release cover at one end.
Carbon-weave door-release cover fitted beside the stitched edge of a black door grab handle.
Single-window-switch door panel with carbon-weave covers around the switch and two door-release control areas.
Angled view of a carbon-weave surround and triangular release-button cover around four black window switches.
Door-panel overview showing carbon-weave covers on the four-switch surround and the upper door-release area.
Ten dark carbon-weave covers laid out on white, showing four panel surrounds and six smaller door-control covers.
Ten reflective carbon-weave covers laid out on white, showing four panel surrounds and six smaller door-control covers.
Ten carbon-weave door-control covers arranged above a white Model Y Juniper, including four panel surrounds and six smaller covers.
Carbon-weave surround around a single window switch and adjacent triangular door-release button on a black door panel.
Close-up of a carbon-weave door-release cover with a white door symbol beside a stitched black grab handle.
Black door panel with carbon-weave trim around four window switches and covers at the door-release controls.
Carbon-weave driver-door switch surround viewed across the grab handle, showing four window switches and release-button covers.
Close-up of four black window switches inside a carbon-weave surround with a triangular door-release cover at one end.
Carbon-weave door-release cover fitted beside the stitched edge of a black door grab handle.
Single-window-switch door panel with carbon-weave covers around the switch and two door-release control areas.
Angled view of a carbon-weave surround and triangular release-button cover around four black window switches.
Door-panel overview showing carbon-weave covers on the four-switch surround and the upper door-release area.
Ten dark carbon-weave covers laid out on white, showing four panel surrounds and six smaller door-control covers.
Ten reflective carbon-weave covers laid out on white, showing four panel surrounds and six smaller door-control covers.

Dry Carbon Fiber Window Lift Button Trim & Switch Covers for Model Y Juniper

Normal fiyat $149.00 USD
Satış ücreti $149.00 USD Normal fiyat $209.00 USD
Birim fiyat
29%'i kaydedin
%3Cp%3EBu%20%C3%BCr%C3%BCn%C3%BC%20sat%C4%B1n%20ald%C4%B1%C4%9F%C4%B1n%C4%B1zda%20[points_amount]%20kazan%C4%B1n.%3C/p%3E
Ödeme seçenekleri
  • Visa
  • Mastercard
  • American Express
  • Shop Pay
  • Apple Pay
  • Google Pay
  • Amazon
  • Discover
  • Diners Club
  • Bancontact
  • iDEAL Wero
  • USDC
  • AliPay
  • Bizum
  • MB WAY
  • Satispay
Bir soru sor

Bir soru sor

* Zorunlu Alanlar

 Ölçü Rehberi Paylaşmak
Güvenle alışveriş yapın

  • 149$ üzerindeki siparişlerde ücretsiz kargo

    Tahmini teslimat ·Nov 12 – Nov 16

  • 30 günlük ücretsiz iade ve değişim

  • 30 Günlük Fiyat Koruması

    Fiyat farkını iade ediyoruz.

  • Ömür boyu müşteri desteği

    Bire bir ürün desteği.

    Bize ulaşın
Ten carbon-weave door-control covers arranged above a white Model Y Juniper, including four panel surrounds and six smaller covers.

Dry Carbon Fiber Window Lift Button Trim & Switch Covers for Model Y Juniper

Ürün açıklaması
Gönderim ve İade
TESERY Dry Carbon Fiber Window & Door Switch Covers for Model Y Juniper
01 / PRODUCT HIGHLIGHTS

Dry Carbon Fiber Window & Door Switch Covers for Model Y Juniper

Bring a coordinated carbon fiber finish to your door controls with this TESERY ten-piece set. Four panel covers and six smaller covers dress the window switch surrounds and matching door-release areas while adding a protective layer over the original surfaces.

Ten Pieces. One Coordinated Look.

Matching covers connect the details across your window switch panels and door-release areas for a consistent interior finish.

Genuine Dry Carbon Fiber

Choose Twill Weave or Plain Weave, each available in Matte or Gloss, to complement your cabin's style.

Peel, Align & Press

Pre-applied 3M adhesive makes installation straightforward. Designed for left-hand-drive vehicles, with no drilling or switch removal required.

02 / INSTALLED VIEW

Carbon fiber detail, right where you reach.

Installed view of carbon fiber window and door switch covers for Tesla Model Y Juniper
Window Switch Surrounds & Door-Release Areas Ten-Piece Cover Set · Left-Hand Drive Only
03 / MATERIALS & CONSTRUCTION

Choose your weave. Define your finish.

Reference comparison of plain weave and twill weave carbon fiber textures

100% Genuine Dry Carbon Fiber

Formed dry carbon fiber covers bring authentic woven texture to the door controls. Each piece overlays its corresponding original surface.

Twill Weave or Plain Weave

Twill Weave creates a diagonal pattern. Plain Weave offers a more regular, grid-like appearance. Choose the texture that suits your interior.

Matte or Gloss

Matte offers softer reflections and a subtle appearance. Gloss adds a more reflective finish that emphasizes the woven texture. Both finishes are available with either weave.

Shaped around the controls.

Four panel covers and six smaller covers follow the corresponding switch surrounds and door-release surfaces, with openings that leave the controls accessible.

Pre-applied 3M adhesive attaches the covers to the existing surfaces without replacing the original switch assemblies.

Close-up of carbon-fiber trim around a window switch and on the door-release button.
04 / VEHICLE FITMENT

Match your model and switch layout.

Compatible Model Model Y Juniper Premium 2025+
Not Compatible Pre-Juniper Model Y
Model 3 / Model 3 Highland
Model Y Standard
Model YL
Right-hand-drive vehicles
Steering Position Left-hand drive only
Mounting Location Window switch panels and matching door-release areas
Existing Covers & Films Compatible with existing trim covers and films without interfering with switch operation.

Check your model, production date, steering position, and door-control layout before ordering. For help matching your vehicle, email support@tesery.com with clear photos of the door panels.

Ten carbon-fiber switch-panel and door-control covers laid out above a white Model Y Juniper.
How do I check the correct version?

Confirm your model and production date from your vehicle information, then check that your vehicle is left-hand drive. Compare the driver's switch arrangement, panel outlines, and door-release locations with the product images. If the layout differs, contact TESERY before ordering.

05 / INSTALLATION & WHAT'S INCLUDED

A simple DIY upgrade in about ten minutes.

Reverse sides of ten carbon-fiber door-control covers showing the red adhesive release liners.

Pre-applied 3M adhesive

  • Easy DIY installation, typically completed in about ten minutes.
  • No drilling or removal of the original switch assemblies.
  • No installation tools required.
  • Check alignment before removing each adhesive liner.
  • Use the included adhesive promoter as directed by its instructions.

The time estimate covers fitting the covers. Follow the supplied adhesive instructions for any waiting period or aftercare requirements.

Included in the Box

  • Carbon fiber panel covers × 4
  • Smaller carbon fiber door-control covers × 6
  • 3M double-sided adhesive, pre-applied
  • Adhesive promoter × 1

Before You Start

  • Have a soft, clean cloth ready.
  • Use cleaning products suitable for the original contact surfaces.
  • Make sure all mounting surfaces are clean and dry.
  • Identify each cover's position and test the alignment with its adhesive liner still in place.
  1. Clean and dry the mounting surfaces. Test-fit each cover, then use the adhesive promoter according to its supplied instructions.
  2. Peel off the adhesive liner, align the cover with its matching surface, and press into place. Keep adhesive clear of moving controls.
  3. Inspect the edges for lifting. Check window switch movement and door-release operation, making sure no cover obstructs a control.
06 / CARE & SUPPORT

Care for the finish. Get help when you need it.

For fitment questions or order support, contact support@tesery.com.

Report shipping damage, defects, or incorrect items within seven days of delivery. Include your order number and clear photos or video, and keep the original packaging. Obtain a return authorization (RMA) before sending an item back.

How should I clean the carbon fiber covers?

Wipe gently with a soft cloth. Avoid abrasive cleaning, bleach, strong alcohol, and harsh chemicals. Before using a coating or protectant, confirm that it is suitable for your chosen matte or gloss finish.

Can I remove and reinstall the covers?

Contact TESERY for removal guidance before taking off the covers. Residue-free removal and reuse of the original adhesive are not guaranteed. Reinstallation may require replacement adhesive.

What are the return conditions?

Return requests can be initiated within 30 days of delivery. For non-quality returns, items must be unused, uninstalled, in resellable condition, and in their original packaging with proof of purchase. Applicable original shipping and handling costs and return shipping costs are deducted from the refund.

Quality-related exchanges are assessed separately; installation alone does not automatically exclude a claim. If a part does not fit, send your vehicle details and photos so support can distinguish an incorrect selection from a product mismatch. Request an RMA before returning any item.

What does the warranty cover?

The carbon fiber covers carry a one-year warranty against manufacturing defects. Normal wear, incorrect installation, chemical damage, and UV-related aging are excluded. Any product-specific warranty terms take precedence.

To request assistance, email support@tesery.com with your order number and clear photos or video of the issue.

Önemli Duyuru:

Kurulum sonrası herhangi bir sorunla karşılaşırsanız, ürünü çıkarmadan önce lütfen bizimle iletişime geçin.

Araç bilgilerini (model/yıl/Şasi No) ve fotoğraf veya kısa videoları sağlamanız, sorununuzun çok daha hızlı çözülmesine yardımcı olacaktır.

Sorun giderme yapılmadan önce çıkarılan veya değiştirilen ürünler iade veya değişim için uygun olmayabilir.

TESERY İade Politikası

Size sorunsuz ve keyifli bir alışveriş deneyimi sunmayı taahhüt ediyoruz. Bir ürünü iade etmeniz gerekirse, açık ve kolay bir iade hizmeti sunuyoruz.

1. Sipariş İptali

  • Siparişiniz kargoya verilmeden önce iptal talebinde bulunabilirsiniz.

  • Siparişiniz zaten kargoya verildiyse, gönderiyi durdurmak için elimizden geleni yapacağız; ancak bunun garantisi yoktur.

  • Lütfen iptal talebinizi e-posta yoluyla veya çevrimiçi müşteri hizmetlerimiz üzerinden iletin.

2. 30 Günlük İade Politikası

Ürünü teslim aldığınız tarihten itibaren 30 gün içinde iade talebinde bulunma hakkınız vardır. Sorunsuz bir süreç için lütfen bizimle iletişime geçip iadeyi bu 30 günlük süre içinde başlatın.

3. İade Koşulları

Ücret iadesine hak kazanmak için iade edilen ürünlerin aşağıdaki koşulları karşılaması gerekir:

  • Ürün, teslim aldığınız zamankiyle aynı durumda olmalıdır: giyilmemiş, kullanılmamış, etiketleri üzerinde ve orijinal ambalajında.

  • Satın alma kanıtı gereklidir.

4. İade Nedenleri ve İlgili Ücretler

İki tür iadeyi ele alıyoruz:

  • Kalite Sorunları veya Hasarlı Ürünler:

    • Aldığınız ürün kusurlu, hasarlıysa veya yanlış ürün aldıysanız lütfen hemen bizimle iletişime geçin. Ücretin tamamını iade eder veya yenisini gönderir ve ilgili tüm masrafları karşılarız.

  • Kaliteyle İlgili Olmayan İadeler (ör. Kişisel Tercih):

    • Kişisel tercihler nedeniyle (ör. fikir değişikliği, renk veya tarzdan memnuniyetsizlik) başlatılan iadelerde %15 yeniden stoklama ücreti uygulanır ve iade kargo masrafları müşteriye aittir.

5. İade Süreci

İade işlemini başlatmak için lütfen şu adımları izleyin:

  1. Bize Ulaşın:

  2. Talimatları Alın:

    • İade talebiniz onaylandıktan sonra, kargo adresi ve paketleme yönergeleri dâhil olmak üzere ayrıntılı iade talimatlarını size göndereceğiz.

  3. Ürünü Geri Gönderin:

    • Lütfen ürünü sağlanan talimatlara uygun şekilde geri gönderin. İade talebinde bulunmadan gönderilen ürünlerin kabul edilmeyeceğini lütfen unutmayın.

6. İade Edilemeyen Ürünler

Nitelikleri gereği bazı ürün türleri iade edilemez:

  • Özel Ürünler: Örneğin, açıkça özel ürün olarak belirtilen direksiyonlar ve jantlar, kaliteyle ilgili olmayan sorunlar nedeniyle iade edilemez.

  • Belirli Ürünler: Buna hediye kartları, tehlikeli maddeler veya yanıcı sıvılar/gazlar dahildir.

Belirli bir ürünün uygunluğu hakkında sorularınız varsa satın almadan önce lütfen bizimle iletişime geçin.

7. Geri Ödemeler ve Değişimler

  • Geri ödemeler:

    • İade ettiğiniz ürünü aldıktan ve inceledikten sonra sizi bilgilendirecek ve geri ödemenin onaylanıp onaylanmadığını bildireceğiz. Onaylanan geri ödemeler, 1-5 iş günü içinde otomatik olarak ilk ödeme yönteminize yapılır. Paranın hesabınıza geçme süresi bankanıza veya kredi kartı şirketinize bağlıdır.

  • Değişimler:

    • İstediğiniz ürünü en hızlı şekilde alabilmeniz için mevcut ürünü iade etmenizi ve iade kabul edildikten sonra yeni ürün için ayrı bir satın alma işlemi gerçekleştirmenizi öneririz.

8. Satış Sonrası Destek Gereklilikleri

Adil ve verimli bir çözüm süreci sağlamak için müşterilerin, satış sonrası destek talep ederken gerekli bilgileri sağlaması gerekir. Bu bilgiler aşağıdakilerle sınırlı olmamak üzere şunları içerir:

- Araç bilgileri (model, yıl, VIN)
- Sorunun açık bir açıklaması
- Sorunu gösteren destekleyici fotoğraflar ve/veya kısa videolar

Lütfen dikkat:

Gerekli bilgilerin sağlanmaması, sorunu doğru şekilde teşhis etmemizi engelleyebilir ve iadelerin, geri ödemelerin veya değişimlerin işleme alınmasında gecikmelere ya da işlemin gerçekleştirilememesine yol açabilir.

Önceden iletişim kurulmadan monte edilen, üzerinde değişiklik yapılan veya çıkarılan ürünlerde, ürünün durumu doğrulanamıyorsa TESERY iade taleplerini reddetme hakkını saklı tutar.

★★★★★
★★★★★
★★★★★
★★★★★