White Model Y Juniper front end with dark split trim outlining the lower front lamps.
Four carbon-pattern front-lamp trim pieces: two horizontal upper accents and two curved outer accents.
Before-and-after comparison of a white front bumper lamp with and without carbon-pattern trim.
Installed front-lamp trim beside fitment labels for Model Y Juniper 2025+ and Model YL six-seat 2026+.
Four-piece split front-lamp trim set arranged as two upper and two outer accents.
Left and right front lamps shown with matching carbon-pattern upper and outer trim.
Carbon-pattern trim following the upper and outer contours of a lower front lamp.
Close-up of a lower front lamp framed by carbon-pattern trim with the lamp face exposed.
Close-up of the molded carbon-look ABS trim surface above the front lamp.
Glossy carbon-look front-lamp trim showing reflected highlights on the patterned surface.
Matte carbon-look front-lamp trim with a subdued patterned finish.
Side-by-side close-ups comparing glossy and matte carbon-look front-lamp trim.
Close-up of the tapered lower tip of a carbon-pattern outer lamp trim piece.
Hands showing the underside of split trim pieces and peeling red adhesive backing.
Hand pressing a carbon-pattern trim piece into place around a white bumper lamp.
Four installation panels showing cleaning, joining and test-fitting, peeling the liner and pressing the trim.
Four front-lamp trim pieces arranged on white, labeled two upper and two outer accents.
White Model Y front end with dark split trim around both lower front lamps.
White Model Y Juniper front end with dark split trim outlining the lower front lamps.
Four carbon-pattern front-lamp trim pieces: two horizontal upper accents and two curved outer accents.
Before-and-after comparison of a white front bumper lamp with and without carbon-pattern trim.
Installed front-lamp trim beside fitment labels for Model Y Juniper 2025+ and Model YL six-seat 2026+.
Four-piece split front-lamp trim set arranged as two upper and two outer accents.
Left and right front lamps shown with matching carbon-pattern upper and outer trim.
Carbon-pattern trim following the upper and outer contours of a lower front lamp.
Close-up of a lower front lamp framed by carbon-pattern trim with the lamp face exposed.
Close-up of the molded carbon-look ABS trim surface above the front lamp.
Glossy carbon-look front-lamp trim showing reflected highlights on the patterned surface.
Matte carbon-look front-lamp trim with a subdued patterned finish.
Side-by-side close-ups comparing glossy and matte carbon-look front-lamp trim.
Close-up of the tapered lower tip of a carbon-pattern outer lamp trim piece.
Hands showing the underside of split trim pieces and peeling red adhesive backing.
Hand pressing a carbon-pattern trim piece into place around a white bumper lamp.
Four installation panels showing cleaning, joining and test-fitting, peeling the liner and pressing the trim.
Four front-lamp trim pieces arranged on white, labeled two upper and two outer accents.
White Model Y front end with dark split trim around both lower front lamps.

適用於 Model Y Juniper 與 YL 6 座版的 ABS 分體式前霧燈框蓋

★★★★★ (5)
原價 $79.00 USD
特價 $79.00 USD 原價
單價
節省
%3Cp%3E%E8%B3%BC%E8%B2%B7%E6%AD%A4%E5%95%86%E5%93%81%E5%8F%AF%E7%8D%B2%E5%BE%97%20[points_amount]%20%E9%BB%9E%E6%95%B8%E3%80%82%3C/p%3E
付款選項
  • Visa
  • Mastercard
  • American Express
  • Shop Pay
  • Apple Pay
  • Google Pay
  • Amazon
  • Discover
  • Diners Club
  • Bancontact
  • iDEAL Wero
  • USDC
  • AliPay
  • Bizum
  • MB WAY
  • Satispay
提問

提問

* 必填欄位

尺寸指南 分享
放心購物
  • 訂單滿 $149 免運費

    預計送達 ·Nov 22 – Nov 26

  • 30天免費退換貨

  • 30 天價格保障

    我們會退還差額。

  • 終身客戶支援

    一對一產品協助

    聯絡我們
White Model Y Juniper front end with dark split trim outlining the lower front lamps.

適用於 Model Y Juniper 與 YL 6 座版的 ABS 分體式前霧燈框蓋

產品描述
運送與退貨

為什麼要升級為分體式前霧燈飾框?

專為 Model Y Juniper 與 Model YL 六人座 打造的精密工程風格升級套件。這些耐用的 ABS 飾條可無縫包覆前保險桿開口,讓車頭面容更俐落,營造更寬闊、更具設計感的原廠升級外觀。


主要產品優勢

零感測器干擾
精準模塑,貼合原廠線條。對霧燈、停車感測器與 Autopilot 100% 安全 - 無錯誤代碼,毫不費力。
侵略感層次外觀
打破前保險桿的單調沉悶。增添深邃的 3D 輪廓,讓您在每個紅綠燈前都成為焦點。
專為高速公路行駛打造
採用重型汽車專用 3M 膠帶固定。無論是下雨、高速風壓,還是自動洗車 - 它都穩固如初。

工程比較

我們的分體式霧燈飾框蓋

  • ✓ 高等級射出成型 ABS 結構
  • ✓ 耐衝擊且耐候的工程設計
  • ✓ 精密分體輪廓設計,維持霧燈照明效果
  • ✓ 專為 Model Y Juniper 與 Model YL 六人座量身打造

一般替代品

  • • 低等級再生塑料,容易龜裂
  • • 材質脆弱,在紫外線高溫下容易變形褪色
  • • 較笨重的一體式設計,會遮擋霧燈光束
  • • 安裝鬆動,造成縫隙不均與震動噪音

相容性

相容於
2025+ Tesla Model Y Juniper
2026+ Tesla Model YL 六人座
不相容於
2020–2024 Model Y / 2026+ 非 Juniper 車款 / Model Y Performance
下單前,請確認您的車款年份與配備等級。

常見問題(FAQ)

這些飾框蓋會遮擋或妨礙前霧燈或停車感測器嗎? +
不會。分體式飾框設計經過 3D 雷射掃描,可精準貼合 Model Y Juniper 與 Model YL 6-Seater 的霧燈外殼和前保險桿感測器,確保完全不會干擾燈光輸出或停車雷達系統。
這款產品同時適用於標準版 Model Y Juniper 和 Model YL 6-Seater 嗎? +
可以!Tesla Model Y Juniper(2025+)標準車款與長軸距 Model YL 6-Seater(2026+)共用相同的前端飾板霧燈凹槽尺寸,確保兩款車都能實現平整、無縫的貼合。
這項產品是由什麼材質製成的? +
這些飾框蓋採用高品質汽車原廠等級 ABS 塑膠,以精密射出成型製成。ABS 以高抗衝擊性、柔韌性和耐候性著稱,可確保長期抵抗道路碎屑與惡劣天候,持久耐用。
日後可以在不損傷車漆的情況下將其移除嗎? +
可以。高黏性汽車用 3M 膠帶可透過吹風機或熱風槍輕柔加熱後安全移除,剩餘的黏著劑殘留物則可使用異丙醇或除膠劑清除。
我該如何在亮面與霧面碳纖維表面處理之間選擇? +
選擇亮面碳纖維,即可呈現具反光效果的高光澤透明塗層,突顯碳纖維編織紋理;選擇霧面碳纖維,則可獲得緞面低反光表面,營造低調的原廠風格。

重要通知:

如果安裝後遇到任何問題,請在拆除產品前先與我們聯繫。

提供車輛詳細資訊(型號/年份/車輛識別碼 VIN)以及照片或短影片,將有助於我們更快解決您的問題。

在故障排除前拆除或更改產品,可能會導致無法退貨或更換。

TESERY 退貨政策

我們致力於為您提供無憂且愉快的購物體驗。如果您需要退回商品,我們提供清楚且便利的退貨服務。

1.取消訂單

  • 您可以在訂單寄出前申請取消訂單。

  • 如果您的訂單已經寄出,我們會盡力攔截,但不保證一定成功。

  • 請透過電子郵件或我們的線上客服提交取消申請。

2. 30 天退貨政策

您有權在收到商品之日起 30 天內申請退貨。為確保流程順利,請務必在這 30 天期限內聯絡我們並提出退貨申請。

3. 退貨資格

如要符合退款資格,退回的商品必須符合以下條件:

  • 商品必須維持收到時的相同狀態——未穿戴、未使用、吊牌完整,並置於原包裝內。

  • 須提供購買證明。

4. 退貨原因與相關費用

我們處理兩種類型的退貨:

  • 品質問題或商品損壞:

    • 若您收到的商品有瑕疵、損壞,或收到錯誤商品,請立即聯絡我們。我們將提供全額退款或換貨,並承擔所有相關費用。

  • 非品質相關退貨(例如個人偏好):

    • 若因個人偏好而退貨(例如改變心意,或對顏色或款式不滿意),將收取 15% 的補貨費,且退貨運費由顧客負擔。

5. 退貨流程

如要開始退貨,請依照以下步驟操作:

  1. 聯絡我們:

  2. 接收 instructions:

    • 退貨申請獲核准後,我們會向您提供詳細的退貨 instructions,包括寄送地址與包裝指南。

  3. 將商品寄回:

    • 請依照提供的指示將商品寄回。請注意,未事先申請退貨而直接寄回給我們的商品將不予受理。

6. 不可退貨商品

由於商品性質特殊,某些類型的商品不符合退貨資格:

  • 客製化產品:例如明確標示為客製化產品的方向盤和車輪,不得因非品質相關問題退貨。

  • 特定商品:包括禮品卡、危險物品或易燃液體/氣體。

如果您對特定商品是否符合資格有任何疑問,請在購買前聯絡我們。

7. 退款與換貨

  • 退款:

    • 我們收到並檢查您退回的商品後,會通知您退款是否已獲核准。核准的退款將在 1-5 個工作日內自動退回至您原先使用的付款方式。 實際入帳時間取決於您的銀行或信用卡公司。

  • 換貨:

    • 為最快確保您取得所需商品,我們建議您先退回現有商品;退貨獲得受理後,再另外購買新商品。

8. 售後支援要求

為確保公平且有效率地解決問題,客戶申請售後支援時必須提供必要資訊,包括但不限於:

- 車輛詳細資訊(車型、年份、VIN)
- 清楚描述問題
- 顯示問題的相關照片及/或簡短影片

請注意:

未提供所需資訊可能會使我們無法準確診斷問題,並可能導致退貨、退款或換貨處理延遲,甚至無法處理。

對於已安裝、改裝或在未事先溝通的情況下拆除的產品,若無法確認產品狀況,TESERY 保留拒絕退貨申請的權利。

★★★★★
★★★★★
★★★★★
★★★★★