TESERY 19"/20" Brake Caliper Covers for Model Y / Model Y Juniper / Model YL

★★★★★ (592)
Four red caliper covers above a black Tesla Model Y with red covers visible behind the wheels.
Side-by-side brake caliper illustrations labeled US/China version and Berlin version, showing different caliper shapes.
Red caliper cover visible through the spokes of a dark Tesla wheel.
Brake assembly before and after installation of a red caliper cover, shown with the wheel removed.
Four close-ups of a red caliper cover showing surface finish, mounting hook, fasteners and end cap.
Set of four red Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four yellow Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four bright green Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four turquoise Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four orange Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four light pink Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four magenta Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four black Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four silver Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four blue Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four light purple Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four deep red Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four gold-colored Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four yellow-green Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four dark purple Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Four red caliper covers above a black Tesla Model Y with red covers visible behind the wheels.
Side-by-side brake caliper illustrations labeled US/China version and Berlin version, showing different caliper shapes.
Red caliper cover visible through the spokes of a dark Tesla wheel.
Brake assembly before and after installation of a red caliper cover, shown with the wheel removed.
Four close-ups of a red caliper cover showing surface finish, mounting hook, fasteners and end cap.
Set of four red Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four yellow Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four bright green Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four turquoise Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four orange Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four light pink Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four magenta Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four black Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four silver Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four blue Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four light purple Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four deep red Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four gold-colored Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four yellow-green Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Set of four dark purple Tesla-lettered caliper covers with a close-up over a brake disc and a vehicle installation example.
Regular price $139.00 USD
Sale price $139.00 USD Regular price $270.00 USD
Unit price
Save 49%
%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
Red
Yellow
Green
Tiffany Blue
Orange
Pink
Dark Pink
Black
Hoar
Dark Blue
Lavender Purple
Dark Red
Dark Gold
Dark Green
Dark Purple
Pay with Ease
  • Visa
  • Mastercard
  • American Express
  • Shop Pay
  • Apple Pay
  • Google Pay
  • Amazon
  • Discover
  • Diners Club
  • Bancontact
  • iDEAL Wero
  • USDC
  • AliPay
  • Bizum
  • MB WAY
  • Satispay
  • Scalapay
Ask a question

Ask a Question

* Required fields

Size guide Share
Shop with confidence
  • Free Worldwide Shipping

    Orders US$149+

    Orders US$149+ ·Nov 29 – Dec 03

  • 30-Day Returns & Exchanges

    Policy details
  • 30-Day Price Protection

    We refund the price difference.

  • Lifetime Customer Support

    One-to-one product help.

    Contact us
Four red caliper covers above a black Tesla Model Y with red covers visible behind the wheels.

TESERY 19"/20" Brake Caliper Covers for Model Y / Model Y Juniper / Model YL

Product description
Shipping & Return
6061-T6
Machined aluminium
Four covers
Two front, two rear
Bolt-on
No brake bleeding
15 finishes
Painted shell
Two letterings
White or black
Fit by shape
Matched to caliper
Model Y · 2020–2026

Factory brakes. A different finish.

Four machined aluminium shells that sit over the calipers your Model Y already has. The caliper, pads, rotor and hydraulics underneath stay exactly as Tesla built them — what changes is what you see through the spokes.
White Model Y from the side, red caliper covers visible through the spokes of both wheels
Before you order

An appearance part — not a brake upgrade.

Nothing here changes clamping force, stopping distance or heat dissipation. Your factory caliper, pads, rotors and fluid still do all of the work.
If you have a noise, a soft pedal, uneven wear or a leak, that is a service item. A cover should never be used to hide one.
Front wheel close-up on a white Model Y, a red caliper cover fitted behind the spokes of a factory wheel
Fitment first

Three shells, because the front caliper is not the same on every Model Y.

Fremont, Shanghai and Berlin cars can differ in front caliper geometry. The VIN prefix is a useful hint; the caliper’s visible shape is what decides it. That is why this part exists in three molds rather than one.
US/China and Berlin front calipers side by side and labelled, showing the difference in caliper body casting
Shell A
Juniper 2025.03+ / YL 2026+
US / China caliper profile
Shell B
Juniper 2025.03+ / YL 2026+
Berlin caliper profile
Shell C
Model Y 2020 – 2025.02
US / China caliper profile
Not compatible with Model Y Performance 2020+ or Model Y Standard 2026+. No shell covers either brake geometry. Modified wheels, spacers or non-standard brake parts should be measured before ordering.
Materials

Machined 6061-T6, not moulded.

Formed aluminium gives a rigid shell with a defined edge and a surface that holds a true reflection. The chamfers are cut, not suggested. In the wheel well it reads as metal, because it is.
Macro detail of a machined chamfer on a red caliper cover, tool marks visible on the bare aluminium edge
What arrives

Front and rear are not the same part.

Two larger covers sit over the front calipers, two smaller ones over the rear. They are shaped differently and will not interchange — lay them out and match the pair before you start.
Four red caliper covers laid out flat on white, labelled front left, front right, rear left and rear right
Finishes

Fifteen finishes, matched to the shell.

Colour is applied to the aluminium, not printed onto it. Fifteen finishes are offered in total; which of them you can order follows from the shell your caliper needs, not from the paint itself.
Caliper covers shown in the available finishes, laid out in a five by three grid at the same angle and scale
Lettering

Two lettering sheets in every box.

White and black lettering are both included, so you decide what reads best against the paint. Dry-fit the cover first — once the lettering is applied, the part is no longer returnable.
The same red caliper cover shown twice, white TESLA lettering on the left and black lettering on the right
Before you drive

Wheel size alone does not mean it fits.

A 19-inch wheel is not a guarantee. Spoke profile, spacers and any brake work all change the gap. Fit the cover, refit the wheel, then turn it a full rotation by hand.
Clearance to the spokes, through the full rotation
Clearance to the rotor, hose and bleed screw
Wheel bolts torqued to Tesla’s current spec
Cover fixings re-checked after the first drive
A gloved hand reaching past the spokes to check the gap around a fitted red caliper cover
Professional installation recommended. The work involves lifting the car, removing wheels and inspecting the brake area.
In the box

One set, four wheels.

4
Aluminium covers — two front, two rear
4
White lettering sheets
4
Black lettering sheets
1
Fixing kit for your configuration
Everything in the box: four red covers, four white and four black lettering strips, brackets, bolts and clips
Specifications

The numbers.

Material6061-T6 aluminium
Pieces4 — 2 front, 2 rear
SurfacePainted, gloss finish
Finishes15
LetteringWhite and black sheets included
FixingBolts and spring clips
FitmentModel Y Juniper 2025.03+ / Model YL 2026+
FitmentModel Y 2020–2025.02
Not compatibleModel Y Performance 2020+ / Model Y Standard 2026+
Wheel size19" and 20" factory wheels
Compare

Three ways to change how a caliper looks.

Caliper covers
Painted calipers
Big brake kit
Cost
$139
Paint and labour
Several times higher
Downtime
About an hour
Two to three days
One to two days
Reversible
Unbolt
Needs repaint
No
Colour options
15
Custom mix
Three to six
Changes braking
No
No
Yes
Brake service
Remove the cover
Repaint after
New hardware
FAQ

Questions, answered.

How do I know which version fits my car?
Start with the production period. A Model Y built before March 2025 uses the 2020–2025.02 shell. A Juniper built from March 2025, or a YL from 2026, uses one of the two Juniper shells — and which of those depends on the front caliper, not the year.
How do I tell the US/China caliper from the Berlin one?
Compare the physical front caliper against the reference image above. The VIN prefix — 5YJ for Fremont, LRW for Shanghai, XP7 for Berlin — is a useful first hint, but production changes and vehicle history both create exceptions. The shape you can see under the wheel is the answer.
Does it fit a Model Y Performance or the Standard?
No. Neither the Performance (2020+) nor the Standard (2026+) brake geometry is covered by any of the three shells. Fitting the wrong one is the single most common mistake on this part, so check this before you order rather than after.
Will it change how the car brakes?
No. This is a painted aluminium cover over the caliper you already have. It does not touch the piston, the pads, the rotor or the fluid, and it makes no claim about clamping force, stopping distance or cooling. The original brake components remain the working parts.
Can I fit it myself?
The job means lifting the car, removing the wheels, bolting the cover on and checking clearance through a full rotation. If you are comfortable with all of that, it is a straightforward afternoon. If you are not, use a qualified technician — the clearance check is the part that matters and it is easy to skip.
Will it clear my aftermarket wheels?
Wheel diameter alone tells you nothing useful — spoke profile is what decides it. Factory 19" and 20" wheels are the intended application. With aftermarket wheels, spacers or any brake work, do a dry fit and turn the wheel a full rotation by hand before driving.
Do I have to take it off for brake service?
Yes, whenever a technician needs unobstructed access to the caliper. The fixings are designed to stay reachable, so removal is a matter of unbolting rather than destroying anything.
White or black lettering — which do I get?
Both. Four white and four black sheets are in the box, so you apply the one that reads best against the paint. White tends to suit darker finishes, black tends to suit lighter ones.
Can I return it after fitting?
Dry-fit first, and only apply the lettering once you are sure. Parts that have been driven on, scratched or modified — including applied lettering — may not qualify. Check the current refund policy before ordering.

Important Notice:

If you encounter any issues after installation, please contact us before removing the product.

Providing vehicle details (model/year/VIN) along with photos or short videos will help us resolve your issue much faster.

Products that are removed or altered before troubleshooting may not be eligible for return or replacement.

TESERY Return Policy

We are committed to providing you with a worry-free and enjoyable shopping experience. Should you need to return a product, we offer a clear and convenient return service.

1.Order Cancellation

  • You can request to cancel your order before it has been shipped.

  • If your order has already been shipped, we will do our best to intercept it, but success is not guaranteed.

  • Please submit your cancellation request via email or through our online customer service.

2. 30-Day Return Policy

You have the right to request a return within 30 days from the date you receive your item. To ensure a smooth process, please make sure to contact us and initiate the return within this 30-day period.

3. Eligibility for Returns

To be eligible for a refund, returned products must meet the following conditions:

  • The item must be in the same condition as when you received it—unworn, unused, with tags, and in its original packaging.

  • Proof of purchase is required.

4. Return Reasons & Associated Fees

We handle two types of returns:

  • Quality Issues or Damaged Products:

    • If the item you received is defective, damaged, or if you received the wrong item, please contact us immediately. We will issue a full refund or provide a replacement and will cover all associated costs.

  • Non-Quality-Related Returns (e.g., Personal Preference):

    • For returns initiated due to personal preferences (e.g., change of mind, dissatisfaction with the color or style), no restocking fee will be charged, and the customer is responsible for covering the return shipping costs.

5. The Return Process

To start a return, please follow these steps:

  1. Contact Us:

  2. Receive Instructions:

    • Once your return request is approved, we will send you detailed return instructions, including the shipping address and packing guidelines.

  3. Ship the Item Back:

    • Please ship the item back according to the instructions provided. Please note that items sent back to us without first requesting a return will not be accepted.

6. Non-Returnable Items

Due to their nature, certain types of items are not eligible for return:

  • Customized Products: For example, steering wheels and wheels that are explicitly marked as custom products cannot be returned for non-quality-related issues.

  • Specific Items: This includes gift cards, hazardous materials, or flammable liquids/gases.

If you have any questions about the eligibility of a specific item, please contact us before making a purchase.

7. Refunds & Exchanges

  • Refunds:

    • Once we receive and inspect your returned item, we will notify you and inform you if the refund has been approved. Approved refunds will be processed automatically to your original payment method within 1-5 business days. The final credit posting time depends on your bank or credit card company.

  • Exchanges:

    • For the fastest way to ensure you get what you want, we recommend that you return the item you have, and once the return is accepted, make a separate purchase for the new item.

8. After-Sales Support Requirements

To ensure a fair and efficient resolution process, customers are required to provide necessary information when requesting after-sales support, including but not limited to:

- Vehicle details (model, year, VIN)
- Clear description of the issue
- Supporting photos and/or short videos demonstrating the problem

Please note:

Failure to provide the required information may prevent us from accurately diagnosing the issue and may result in delays or inability to process returns, refunds, or replacements.

For products that have been installed, modified, or removed without prior communication, TESERY reserves the right to decline return requests if the product condition cannot be verified.

★★★★★
★★★★★
★★★★★
★★★★★