TESERY 10.25‘’ 안드로이드 4G 테슬라 모델 3 / Y 디스플레이 LCD 계기판 스크린

*Fault: Screen goes black after a few minutes of use and requires a reboot.
Solution : Use a USB drive with a capacity of 4-32GB to download the upgrade files to upgrade.

*Fault: Black Screen
Reason 1: The power supply fuse is burnt out.
Solution1: Replace the fuse of the same model.

Reason 2: Microprocessor abnormal operation caused by other factors.
Solution 2: Restart the key fob.

Reason 3: After unplugged the host connector, it is not plugged in within 5 minutes.
Solution 3: Connect all the wire harnesses, lock the car for 2 hours, keep the mobile phone and remote key more than 20 meters away from the car, and check whether the screen can be setup after 2 hours.

Reason 4: The host or screen plug is not plugged tightly.
Solution 4: Reconnect the host plug.

*Fault: The screen cannot be displayed after startup.
Reason 1: Screen data error.
Solution 1: Press the RST reset button on the right side of the screen to restart the system

*Fault: Unable to enter the navigation.
Reason 1: Navigation software is uninstalled or deleted.
Solution 1: Reinstall the navigation software.

*Fault: Navigation road condition information cannot be updated.
Reason 1: WIFI is not connected.
Solution 1: Connect WIFI to synchronize online map.

*Fault: Satellite receiving is not located.
Reason 1: GPS antenna position interferes.
Solution 1: Relocate the position.

*Fault: The original vehicle information is not synchronized or displayed.
Reason 1: The protocol wire of the power wire is not connected.
Solution 1: Reconnect the wire and check the wire interface.

*Fault: No image in front camera or can not access the front camera.
Reason 1: The protocol wire of the power wire is not connected.
Solution 1: Vehicle setting - Others - Turn on Front camera.

*Fault: 4G network cannot be connected.
Reason 1: Check whether the SIM card is loose or not inserted.
Solution 1: Re insert the SIM card and then restart again.

*Fault: Carplay can't connect after a period of time
Reason 1: Carplay did not connect in the correct way or the screen software version is outdated.
Solution 1: Reconnect Bluetooth or upgrade APP. Contact aftersale service to download the upgrade software.

*Fault: After Tesla upgraded, the screen is always on.
Reason 1: The system signal is not synchronized.
Solution 1: Unplug the power cable and reconnect.

*Fault: After a period of time, the front camera function disappears.
Reason 1: The camera has water ingress or the harness is aged and broken.
Solution 1: Replace the front camera.

Reason 2: The harness of camera is loose.
Solution 2: Reconnect the camera harness.

A2 - Yes, you can connect with WIFI, and you can still update over the air.

A3 - The installation of the dashboard does not affect the warranty of the vehicle. It is installed on the vehicle as an external accessory and does not affect the vehicle's original system or warranty terms.

A4 - Of course! The dashboard display on the Tesla Model 3 supports multiple media formats and platforms, allowing you to access music, podcasts and more via an integrated app or Bluetooth-connected device.

A5 - Yes, the dashboard display on the Tesla Model 3 includes a built-in navigation system that provides turn instructions and real-time traffic updates, and you can plan your route and receive guidance directly on the display.