Model Y Carbon Fiber Spoiler Sport Style - Dry Carbon Fiber Exterior Mods
-
Free Worldwide Shipping
Orders US$149+ -
30-Day Returns & Exchanges
Policy details -
30-Day Price Protection
-
Lifetime Customer Support
Contact us
Model Y Carbon Fiber Spoiler Sport Style - Dry Carbon Fiber Exterior Mods
Model Y pre-refresh rear spoiler
A sharper liftgate line in dry carbon fiber.
Give the original Model Y rear profile a more defined sport-style edge. The spoiler follows the pre-refresh liftgate and installs with pre-applied double-sided automotive adhesive—no drilling into the vehicle.
- Model Y 2020–2025.03
- Glossy or matte carbon fiber
- No-drill adhesive installation
Why owners choose it
Sportier from every rear angle—without pretending it changes the car underneath.
For this kind of upgrade, the buying decision comes down to visible profile, carbon-fiber finish and a clean adhesive install. Those are the product truths this spoiler is built to show.
Raised center, extended tips
The sport-style shape adds a continuous dark edge across the liftgate, with a subtle center rise and tapered outer ends.
Dry carbon fiber
The sellable product is identified as dry carbon fiber, with the woven surface visible in the close-up product photography.
No drilling required
Pre-applied double-sided adhesive mounts the spoiler to the painted liftgate after dry fitting, cleaning and accurate alignment.
Check the body, not only the year
For the original Model Y liftgate—not the Juniper refresh.
Compatible: Tesla Model Y 2020–March 2025 with the pre-refresh rear body and factory liftgate.
Not compatible: Model Y Juniper / refreshed Model Y, Model YL, Model 3, Model S or Model X.
Not verified: aftermarket replacement liftgates or vehicles with another spoiler still installed.
A 2025 registration can refer to either body style depending on market and delivery timing. Compare your rear lamps, liftgate edge and roofline with the installed photos before ordering.
Choose the finish
The same sport profile, in two surface treatments.
Match the spoiler to the carbon-fiber and exterior trim already on your Model Y.
More reflection and contrast
A reflective surface that makes the woven carbon pattern more prominent in direct light.
Lower-reflection finish
A subdued woven appearance that pairs naturally with satin and matte exterior accents.
Product-specific proof
What current owners call out: quality, fit and the finished look.
Published feedback on this product page supports the reasons buyers actually care about.
“Great quality and fits beautifully.”Verified TESERY buyer · United States
“Top quality and looks great!”Verified TESERY buyer · Canada
Product facts
What arrives and what it requires.
In the package
1 × Model Y dry carbon fiber rear spoiler
Pre-applied double-sided adhesive tape
1 × installation guide
Available variants
Glossy Carbon Fiber
Matte Carbon Fiber
Vehicle
Tesla Model Y 2020–2025.03, pre-refresh body. Seat count does not change the listed liftgate fitment.
Installation type
Surface-mounted with double-sided automotive adhesive. No drilling or permanent fasteners are required.
Installation
Dry fit first. Clean carefully. Press progressively.
- Confirm fitment and orientationKeep every adhesive liner in place. Set the spoiler on the factory liftgate and check the full edge, center and both ends.
- Clean and fully dry the surfaceRemove wax, dust, oil and residue from the bonding area. Adhesive cannot compensate for a contaminated or damp surface.
- Mark the center and end positionsUse removable painter's tape as alignment references before exposing the adhesive.
- Bond in a controlled sequencePeel the liner gradually and work across the spoiler, keeping the center and both ends aligned. Do not press isolated sections while leaving a bow in the middle.
- Apply even pressure and let it setPress firmly along the entire adhesive path. Keep the area dry and avoid pulling on the spoiler for 48 hours.
Important: If the car already has a factory or aftermarket spoiler, remove it and all old adhesive first. Do not peel the new liner until the part has been inspected and dry fitted.
Before you order
Model Y sport-style spoiler FAQ
Will it fit a 2025 Model Y?
Only if it is the pre-refresh body covered by the listed Model Y 2020–2025.03 option. It does not fit the refreshed Model Y Juniper. Compare the rear design with the installed photos instead of relying on registration year alone.
Does five-seat or seven-seat configuration matter?
No fitment difference is listed by seat count for this spoiler. The deciding factor is the pre-refresh Model Y body and factory liftgate shape.
Do I need to drill the liftgate?
No. The spoiler uses pre-applied double-sided automotive adhesive. Surface preparation, dry fitting and alignment are essential.
What is the difference between glossy and matte?
Both are woven carbon-fiber options. Glossy reflects more light and emphasizes the weave; matte has a more subdued, lower-reflection appearance.
Can I install it over another spoiler?
No. Remove the existing spoiler and adhesive residue before dry fitting this part. Fitment on aftermarket replacement liftgates is not verified.
What should I know about returns before installation?
TESERY's current policy requires returned products to be unused and in original condition and packaging. Installed, modified or removed products may be declined if their condition cannot be verified. Check the current refund policy before removing protective films or adhesive liners.
Confirm the pre-refresh liftgate, then choose your carbon finish.
Glossy or matte dry carbon fiber for Model Y 2020–2025.03.
Important Notice:
If you encounter any issues after installation, please contact us before removing the product.
Providing vehicle details (model/year/VIN) along with photos or short videos will help us resolve your issue much faster.
Products that are removed or altered before troubleshooting may not be eligible for return or replacement.
TESERY Return Policy
We are committed to providing you with a worry-free and enjoyable shopping experience. Should you need to return a product, we offer a clear and convenient return service.
1.Order Cancellation
-
You can request to cancel your order before it has been shipped.
-
If your order has already been shipped, we will do our best to intercept it, but success is not guaranteed.
-
Please submit your cancellation request via email or through our online customer service.
2. 30-Day Return Policy
You have the right to request a return within 30 days from the date you receive your item. To ensure a smooth process, please make sure to contact us and initiate the return within this 30-day period.
3. Eligibility for Returns
To be eligible for a refund, returned products must meet the following conditions:
-
The item must be in the same condition as when you received it—unworn, unused, with tags, and in its original packaging.
-
Proof of purchase is required.
4. Return Reasons & Associated Fees
We handle two types of returns:
-
Quality Issues or Damaged Products:
-
If the item you received is defective, damaged, or if you received the wrong item, please contact us immediately. We will issue a full refund or provide a replacement and will cover all associated costs.
-
-
Non-Quality-Related Returns (e.g., Personal Preference):
-
For returns initiated due to personal preferences (e.g., change of mind, dissatisfaction with the color or style), no restocking fee will be charged, and the customer is responsible for covering the return shipping costs.
-
5. The Return Process
To start a return, please follow these steps:
-
Contact Us:
-
Send an email to
support@tesery.com/ service@tesery.com or use our live chat to inform us of your return request.
-
-
Receive Instructions:
-
Once your return request is approved, we will send you detailed return instructions, including the shipping address and packing guidelines.
-
-
Ship the Item Back:
-
Please ship the item back according to the instructions provided. Please note that items sent back to us without first requesting a return will not be accepted.
-
6. Non-Returnable Items
Due to their nature, certain types of items are not eligible for return:
-
Customized Products: For example, steering wheels and wheels that are explicitly marked as custom products cannot be returned for non-quality-related issues.
-
Specific Items: This includes gift cards, hazardous materials, or flammable liquids/gases.
If you have any questions about the eligibility of a specific item, please contact us before making a purchase.
7. Refunds & Exchanges
-
Refunds:
-
Once we receive and inspect your returned item, we will notify you and inform you if the refund has been approved. Approved refunds will be processed automatically to your original payment method within 1-5 business days. The final credit posting time depends on your bank or credit card company.
-
-
Exchanges:
-
For the fastest way to ensure you get what you want, we recommend that you return the item you have, and once the return is accepted, make a separate purchase for the new item.
-
8. After-Sales Support Requirements
To ensure a fair and efficient resolution process, customers are required to provide necessary information when requesting after-sales support, including but not limited to:
- Vehicle details (model, year, VIN)
- Clear description of the issue
- Supporting photos and/or short videos demonstrating the problem
Please note:
Failure to provide the required information may prevent us from accurately diagnosing the issue and may result in delays or inability to process returns, refunds, or replacements.
For products that have been installed, modified, or removed without prior communication, TESERY reserves the right to decline return requests if the product condition cannot be verified.